The product reinforcement ribs of the plastic mold injection molding factory are well made, and the injection molding process does not deform

The product reinforcement ribs of the plastic mold injection molding factory are well made, and the injection molding process does not deform

The design of reinforcement ribs for products in injection molding factories is crucial to avoid product deformation issues. The product development team has proposed unique solutions to various challenges of injection molded products. In product design, the clever use of reinforcing ribs can not only ensure the strength and rigidity of the adhesive parts, but also avoid the problem of excessive product wall thickness. By adding reinforcement ribs in appropriate positions, not only can product deformation be prevented, but it also helps to control the flow direction of the adhesive during the molding process.

The product reinforcement ribs of the plastic mold injection molding factory are well made, and the injection molding process does not deform

In the packaging injection molding plant, the size design of the reinforcing ribs should be carefully considered: the thickness of the reinforcing ribs should not exceed 2/3 of the product wall thickness. Taking the product wall thickness of 2.0 millimeters as an example, the maximum thickness of the designed reinforcing ribs is usually 1.33 millimeters. If it is curved or irregularly shaped, the maximum thickness of the reinforcing ribs can be appropriately increased to 1.5 millimeters.

When designing, attention should be paid to avoiding reinforcement thickness exceeding the wall thickness of the adhesive part, in order to avoid shrinkage deformation during the forming process. The correct design method is to ensure that the thickness of the reinforcing ribs is less than 2/3 of the wall thickness. By properly designing reinforcement ribs and encapsulating injection molded products, deformation problems can be effectively avoided, and product quality and stability can be improved.