Plastic mold manufacturers save mold polishing time during plastic mold processing 123
Date: September 21, 2024
During the plastic mold processing, if the polishing time is too long, it can lead to a series of serious consequences. Plastic molds play a crucial role in the plastic processing industry, and their quality directly affects the molding effect and quality of the final product. In the processing of plastic molds, the polishing step is an indispensable part. However, if the polishing time is not handled properly, the problem of excessive polishing will occur, which will affect the processing quality and performance of the mold.
Excessive polishing refers to the deterioration of surface quality during the polishing process of plastic molds due to prolonged polishing time, resulting in defects such as orange peel and micro pits. Especially in the process of mechanical polishing, such problems are more likely to occur. Usually, this non-standard and rough phenomenon is mainly caused by excessive polishing pressure, long polishing time, improper polishing methods, and other reasons. Some users may mistakenly believe that extending the polishing time can improve surface quality, but in fact, this is the wrong approach.
Plastic mold manufacturers save mold polishing time during plastic mold processing 123
When micro pits appear on the surface of plastic molds, it is often due to non-metallic inclusions in the steel formed during the polishing process. These hard and brittle oxides remaining on the steel surface not only affect the quality of the mold, but also reduce its overall performance. Therefore, excessive polishing not only affects the appearance quality of the mold, but also has a negative impact on the service life and performance of the mold, and may even cause the mold to malfunction.
Plastic mold manufacturers must strictly control the polishing time during the plastic mold processing to avoid excessive polishing. Reasonable polishing methods and appropriate polishing time are key factors in ensuring the quality of molds. Only in this way can high-quality, higher precision, and better integrity plastic molds be manufactured, thereby improving production efficiency and product quality. It should be noted that a long polishing time not only wastes costs and time, but also affects the efficiency and quality of the entire production process. Plastic mold manufacturers must be cautious about the polishing step during the mold processing to ensure that the quality and performance of the final product meet the standard requirements.